Share
Max-Pak Full Eject Baler Item#212
Description:
Max-Pak Full Eject Baler
Model: HCE60-FE-9
YR: 2005
Motor: 50 HP
Bale sizes: 60” x 30” x 48”
Bale Weight: 1400 Lbs. (OCC)
Additional Info:
| Main Pump: | Horsepower Limited Piston – 92gpm |
| Main Cylinder: | 9″ Bore, 92″ Stroke, 6″ Rod – Clevis Mount |
| Door Clamp Cylinder: | 5″ Bore, 10″ Stroke, 2.5″ Rod – Clevis Mount |
| System Pressure: | 3,000 psi |
| Operating Pressure: | 2,850 psi |
| Ram Face Pressure: | 105.97 psi |
| Overall Platen Force: | 181,310 lbs. |
| Oil Reservoir: | 350 Gallons |
| Main Hydraulic Manifold | Regenerative Circuit, Integral Relief, Ductile Iron |
| Oil Cooling: | Independent Cooling/Filtration Loop |
| Filtration: | 5 Micron Absolute |
Process: 3 – 4 bales an hour depending on how fast you feed material
Warranty: 180 day parts and labor warranty
Fully reconditioned (reconditioning goes through the entire machine from top to bottom and replace any broken or missing parts, go through the hydraulics and electrical, and power wash and repaint the entire baler. The cylinders are sent out to get repacked and will also do a full reline (As Needed). The machine is constantly dry cycled and tested).
RECOMMENDED MATERIALS HCE60FE-9 BALER
OCC – Old Corrugated Cardboard … (1350 lb)
ONP – Old News Paper – should be dispersed so that material goes in evenly and not in
stacks or clumps … (1475 lb)
UBC – Used Beverage Containers (aluminum cans) … (725 lb)
Steel Cans – Food cans and other light ga. containers, 5 gallon or smaller … (1100 lb)
PETE Containers … (700-1000 lb)
HDPE Containers … (800-1100 lb)
Aluminum Extrusions – Aluminum shapes with .125″ thickness or less … (1150 lb)
Aluminum Pipe or Tubing – .125″ max. wall thickness – 3″ max. diameter … (1000 lb)
Radiators – Automotive radiators or equivalent size heat exchangers … (1400 lb)
Aluminum Siding … (1500 lb)
Aluminum Sheet Scrap – .125″ maximum thickness for pieces less than 6″ wide –
otherwise .063″ maximum thickness … (1350 lb)
