Check out our gallery of products you can buy from us for any of your industrial needs!
Call 866-948-5406 or contact us online to ask us about our products for sale.
Forfex 400 16″ Alligator Shears
Bronneberg Forfex 400 alligator shear with a 16 inch blade. Cleans light and medium non-ferrous material and cuts rebar and catalytic converters.
Handheld Hydraulic Shears
Portable handheld hydraulic shears that make more precise cuts than an alligator shear. Take the tool to the material anywhere on the job.
Forfex 500 20″ Alligator Shear
Bronneberg Forfex 500 with a 20 inch blade. Same power pack as the Forfex 400, with a larger bite for aluminum extrusion and radiators.
Forfex 600 24″ Alligator Shear
Bronneberg Forfex 600 with a 24 inch blade, the longest available. Cuts radiators in one pass and sizes sheet aluminum for baling.
Forfex Catalytic Converter Alligator Shear
Alligator shear built to open catalytic converters from end-of-life vehicles. A foot pedal works the jaws and a side bracket reopens the cut end.
Double Platform Electric Motor Recycling Machine
Electric motor recycling machine with separate cracking and copper extraction platforms, each with its own motor.
Cross Belt Magnets
ElectroMax air cooled overband magnet. Low profile and light, built for tramp metal separation where weight and height are limited.
Shears
RSS series scrap shear with replaceable cutting knives. The jaw design pulls material deep into the jaws, where cutting power is highest.
Multi-Material Balers
Horizontal balers for cardboard, stretch wrap, plastic, clothing and scrap metal. Open-end, closed-door and two-ram models available.
Monsoon Diesel Dust Suppression
Diesel Monsoon air mister for dust and odor control in recycling facilities, transfer stations, wood recycling and composting sites.
Wheel Rim Popper
Wheel popper that separates tires from steel and alloy rims from 10″ to 24″ in a 34-second cycle.
Vehicle Rack and Drainage
Made in the USA vehicle drainage rack with a 10,000 lb capacity. Extracts gas, diesel, oil and antifreeze.
Roll Splitters
Made in the USA roll splitters and guillotine roll cutters for paper, cardboard, plastic, Tetra and aluminum coils.
Factory Reconditioned Trommel Bucket
Factory reconditioned TMB 70 trommel bucket with a 6 month factory warranty. Separates C&D debris, aggregates and stones from soil.
Eddy Current Item# 115 SOLD!!!
30 inch LGI eddy current separator with control panel and spare belt. Pulls copper, aluminum, stainless and brass from shredder waste.
Drum Separator Magnets
Magnetic drum separators that pull iron out of the product stream at discharge points and eject it automatically.
Scrap Handling Magnet
Custom scrap handling electromagnets and lifting beam magnets, built and installed to your specification, with repair service.
A-600 E ALLIGATOR SHEARS
Bronneberg A-600 E alligator shear with 250 tons of force. Cuts oversized pieces, stainless steel and titanium into manageable segments.
McIntyre Shear Model 320 Item# 138
2019 McIntyre Model 320 alligator shear with a 10 HP, 480V motor and 99 tons of pressure at the throat.
Sherbrook OEM Steel Z-pan Conveyor
Sherbrook OEM steel Z-pan conveyor, 48 inches wide with a 15 HP motor. Ran #1 to #7 plastics.
2005 60” Hustler Steel Belt in-feed Conveyor Item#128
2005 Hustler 60 inch steel belt in-feed conveyor. The belt has under 1,000 hours and ran paper only.
60HP Electric Motor- New
New 60 HP electric motor, never run. 265/460V three phase at 888 RPM.
Williams Hammer Mill Item#201
Williams hammermill with new wear liners and 50 lb hammers, set up for non-ferrous material. Includes a spare shaft and rotor.
Electronics Processing Line
New electronics processing line, never installed, built around a US Recycling Automation E50 e-waste shredder that handles up to 3 tons per hour.
Deltax Alligator Shear Item#155
Deltax DTX-680 alligator shear with a 26 3/4 inch blade, 55 tons of shear force and up to 60 cuts per minute.
EXCEL 2 Ram Baler with Feed Conveyor Item#207 SOLD!!!!!
2001 Excel 2R63 two-ram baler with feed conveyor. Automatic baling press with a 60 by 29.5 inch chamber.
Weima WL4S/22 V-Rotor Waste Grinder
Weima WL4S/22 V-rotor waste grinder with a 30 HP, 460V three phase motor.
McIntyre 320 Hydraulic Alligator Shear Item#157 SOLD
McIntyre 320 alligator shear with a 10 HP motor, 12.5 inch blade and 67 tons of shear force.
Eriez HI-VI 7 foot Vibratory Feeder Pan Model
Eriez HI-VI Model 65A vibratory feeder pan, 7 feet long, running on 115 volts.
180cu Dosing Hopper
180 cubic foot dosing hopper, fairly new. Optional 3 foot extensions double the capacity.
120HP Wire Granulator
120 HP Desislava wire granulator with vacuum take-off bin and added controls. Separates copper from its plastic insulation.
48″ Industrial Magnetics Drum Magnet
Industrial Magnetics 48 inch permanent rare earth drum magnet, 18 inch diameter, with stand.
48″ Magnapower Drum Magnet
Magnapower 48 inch permanent rare earth drum magnet, 12 inch diameter, with housing and vibratory feeder conveyor.
36″ Industrial Magnetics Drum Magnet
Industrial Magnetics 36 inch permanent rare earth drum magnet, 18 inch diameter, with stand and housing.
Monsoon Gasoline Dust Suppression
Gasoline Monsoon mister for dust and odor control in industrial and commercial settings. Its atomizer needs no nozzle tips to clean.
Optical Sorter
Optical color sorter that separates plastics and metals by color for higher sorting accuracy and better recovery.
Refurbished Shaker Table 36’ 7”l x 33”w
Refurbished shaker table, 36 feet 7 inches long with a 30 inch inside width.
Refurbished Shake Table 24’6” L x 33” W
Refurbished shake table, 24 feet 6 inches long with a 30 inch inside width.
Shaker Table Dual, Split Motor – 27’ L x 45” Overall Width
Refurbished dual motor split shake table, 27 feet long and 45 inches wide overall.
Liebherr 932 Material Handler with Grapple and Magnet
1999 Liebherr 932 material handler with working grapple and magnet. About 20,000 hours, with a new engine around 10 years ago.
2008 Komatsu Auto Dismantler- PC210LC-8
2008 Komatsu PC210LC-8 crawler auto dismantler with 9,400 hours and a tilting, rotating grapple for pulling engines and wire harnesses.