40 HP total- (2) 20HP – 230/460V- 3PH
1-1/4″ knife width
Cutting Chamber – 20″ x 32″
Hopper opening dimensions- 26″W x 22″T
Control Panel
Motors have both been sent away and tested
Stand Included
New London infeed conveyor Included
FOB IN
Shredder is an American Universal- 74″ x 104″
Purchased shredder system in 2012
Never assembled
Includes grates, hydraulic cylinders and pumps to raise door. Also includes various liners and liner bolts
Had to cut the bottom of the box to lift. Had it welded back together with lazer to correct spec.
Includes old rotor as well. A new Bowe rotor and bearing set is available, additionally.
FOB WY
In great condition
Bale Size: 22″ x 42″ x ≤ 30″
Bale Weight (OCC): ≤ 180 lbs.
Feed Opening: 20″x 42″
Ram Force: 25,134 lbs.
Volume: Small-Medium
Ideal for Cardboard, Plastic and Aluminum
Makes a bale about 40″ long x 27″ wide x 20″ high
For paper trims or selvage trim
It has a shear blade and 2x 5.5kw motors
One is for the main cylinder and the other for the tying needles
Compression cylinder in the front of the unit to build pressure.
3 x18 gauge wires to hold the bale together.
Has a feed door as well as a chute to feed the chamber.
Currently under power.
Total length 17′ and 4″. Drawings and technical data available
Hopper has dimensions of 33″ long x 25.5″ wide x 57″ tall
6 spools to hold the 16 gauge wire rolls
FOB AL
2020 SSI M120 dual shaft
275 HP
Shredder Dims (cutting chamber)- 46” W x 75L
Cat C6 diesel over hydraulic shredder less than 1000 hrs on unit
Mounted on a 2020 Doonan trailer
2019 Peterbilt included (can be separated) 400k miles
New Blades installed last year
Includes extra set of blades
DOT compliant with height and length.
FOB TX
SSI 600 extra heavy duty
slow speed shredder w/ spare set of re-furbished knives & spacers
13” shafts, 300 lb 2” knives, twin 125 HP motors
Independent hydraulic drives
Control Panel
Shaker pan relief & stacker conveyor
Very good operating condition
FOB MA
New London Steel Belt Conveyor
Total Length- 85″
Total Height- 72″
Lower Horizontal- 36″
Belt- 8″w
Used for turnings
Belt goes forward and backward
Unit has been tested in shop
FOB IN
(WATCH VIDEO BELOW)
30 HP Stokkermill single shaft shredder
40 HP Stokkermill granulator
Forsberg G-2 separation table
Dust collection system
Transition conveyor
All cyclones and fans included
System can be seen in operation
FOB TX
3 phase 480V
Capable of stripping 1/16″ – 3″ diameter Strips 90’/min
3 bearings replaced recently
Strips Tech, steel wired cable, AI & Cu Quadrant, lead, PVC, etc Includes a few stripping wheels- 14 knives (1 set) 10 knives (2 sets and an additional) Includes gripping wheels (set) Gear reducer cast has a crack in it. Have new part info for replacement.
Works as is.
Machine new is $25k
FOB IN
Incline Conveyor & Cross belt
100 HP granulator- comes with a few screens
Dosing bins, augers, conveyors
(2) air tables
Sifter
Cyclones, air locks, Dust Collection System
Seeing the equipment, you’ll see the equipment was not used much
Not a lot of hours- Hours unknown as it is not hooked to power.
Equipment was sold with the business.
We have a service tech in the area that can help with disassembly and installation.
Manufactured in 2017
FOB IN
Year 2017
Hours- 13,700
Has an issue with the lifter rollers causing it to miss
Does not come with grapple
Does not have a gen set. We have a used Gema 15kw in stock (sold separate)
We can assist with finding transport
FOB NC
T-15, TRIPLE / S DYNAMICS – GRAVITY SEPARATOR
The Model T-15, with 15 square feet of separation surface, is the intermediate-sized unit of the PACE separators. For efficiency of separation, consistent performance – free of ‘drift’ once the controls have been set and rugged construction, it sets a new standard for dry particle separations.
All 3 are functional
Motor info, parts, and pictures attached.
There are parts and other accessories that go with them.
FOB Massacusetts
