Maxxforce 7 Engine
46,740 miles
33,000 gvw
21,000 lb front axle
23,000 lb rear axle
Allison 2500 Automatic Transmission
Alpine Shredder # is 512V-33-0001
Walking Floor
+/- 1,200 hours on shredder
1.5-2 tons per hour process speed
Comes with Scorpion attachment
4100 hours
(15) Plastic
(3) Metal
PTR7200HD
Runs. Sold as is.
Can be refurbished for an additional fee
The A/C Removal product enables a simple and efficient degassing of automotive air conditioning in cards, trucks and buses.
With its optional suction device, the Airbag Deployment now makes it possible to neutralize passenger restraint systems (airbags and seatbelt tensioners) with reduced noise levels and without particulate residue.
Our handheld hydraulic shears are powerful and portable tools. They will handle more precise cuts than alligator shears, and you can take the tool to the material rather than bringing the material to the shear. The handheld shear is easy to use and relatively lightweight. The high-pressure hydraulic tool can be used anywhere you need to go on the job.
This industrial recycling tool is specially designed for a wide range of testing industrial applications. The Holmatro cutter has general standard blades. Therefore this cutter is very much suitable in applications like:
Catalytic converters, exhaust pipes, doors, A- and B-posts, drive shafts (hollow), engine mountings, steering columns, bumpers, bull bars and pressed steel wishbones.
Rod material, tube profiles, frames, construction materials, wood, roots (trees), fuel pipes, heating pipes, small cables.
Removing risers and feeders from aluminum castings
Removing catalytic converters using conventional tools like angle grinders or reciprocating saws can be slow, tedious, or even dangerous, with plenty of sharp edges to catch your hands and arms. The AutoShear product from AutoDrain makes it quick and easy to cut catalytic converters free from salvage vehicles during the recycling process.
At Solid Equipment Company, we are proud to feature the AutoShear from our partners at AutoDrain. The tool is a cost-effective way to process catalytic converters faster, increasing profits for auto recyclers and salvage yards. Our company works with industrial recyclers, scrap yards, and salvage yards throughout the United States and Canada, providing valuable equipment that increases productivity, maximizes profits, and improves safety at these facilities. We offer both new and used industrial recycling equipment, and we work with our clients to find the best tools and equipment to meet their needs.
Caterpillar Unit with 1310 HP
Serial number 35B3018 with 174 hours
Formerly used as a back up generator for a 42 story building in New York.
The DX-60-8 model features an 8″ cylinder and is ideal where high density performance is desired baling boxes, aluminum cans, plastic bottles, or shrink film.
Model: DXR-60-8
Serial #: BD15951-08
Date Of Mfg: 8/10/2011
Nominal Bale Size: 60”W x 30”D x 48”H
Bale Weight Up To (OCC): 1,400 lbs
Cycle Time (Average) 58 sec
Platen Force Normal 100,500 lbs
Max 120,600 lbs
Platen Face Pressure Normal 57.8 psi
Max 69.4 psi
Motor 3 phase 208/230/460 VAC 15HP
Pump Capacity 12 gpm
Hydraulic Reservoir Capacity 33 gal
Hydraulic Cylinder Bore Dia. 8”
Stroke 54”
Rod Dia. 5”
Operating Pressure Normal 2,000 psi
Max 2,400 psi
Dimensions Overall Height Installed 12’7”
Frame Height 8’10”
Overall Width 6’2”
Overall Depth with Door Closed 3’1”
Overall Depth with Door Open 8’3”
Loading Height 57”
Feed Opening Height 20 ½”
Unit Weight 6,000 lbs
The DX-60-8 model features an 8″ cylinder and is ideal where high density performance is desired baling boxes, aluminum cans, plastic bottles, or shrink film.
Model: DXR-60-8
Serial #: BD15951-08
Date Of Mfg: 8/10/2011
Nominal Bale Size: 60”W x 30”D x 48”H
Bale Weight Up To (OCC): 1,400 lbs
Cycle Time (Average) 58 sec
Platen Force Normal 100,500 lbs
Max 120,600 lbs
Platen Face Pressure Normal 57.8 psi
Max 69.4 psi
Motor 3 phase 208/230/460 VAC 15HP
Pump Capacity 12 gpm
Hydraulic Reservoir Capacity 33 gal
Hydraulic Cylinder Bore Dia. 8”
Stroke 54”
Rod Dia. 5”
Operating Pressure Normal 2,000 psi
Max 2,400 psi
Dimensions Overall Height Installed 12’7”
Frame Height 8’10”
Overall Width 6’2”
Overall Depth with Door Closed 3’1”
Overall Depth with Door Open 8’3”
Loading Height 57”
Feed Opening Height 20 ½”
Unit Weight 6,000 lbs
The new ElectroMax Overband Magnetic Separator provides customers with a smaller, lighter, and more compact system without any compromise in separation performance. This low profile, air cooled electromagnetic conveyor meets the ever-increasing demand for high-powered, light, and compact electro magnets.
Model No. DTX-680
Single Phase: 3 HP / Three Phase:
5.5 HP Speed
Single Phase: 7 1/2 – 30 cuts/min.
Three Phase: 15 – 60 cuts/min.
26 3/4″ Blade Length
2″ – 11 3/4″ Blade Opening
55 Ton Max Shear Force
60 3/8″ L x 30″ W x 47 1/2″ H
30 Gallon Oil Capacity
Blade Table Height: 31 1/4″
Shear Capacity: 30 (1 3/16″) Steel Round Bar 45kg/mm
