Shop
48″ Magnapower Drum Magnet
12″ Diameter
Permanent- Rare Earth
Includes the housing and vibratory feeder conveyor.
Housing was used as an air knife most recently but can be reassembled to the
drum magnet prior to shipping.
120HP Wire Granulator
Desislava 20 Granulator 500/800
SPECS & FEATURES:
-120HP 460v/3ph/60hz electric motor.
-5/16″ screen
-Vacuum take-off bin.
-Approx. Weight: 15,000 lbs
-Chamber opening: 20″x31″
-Rotor type: Open style, 5 rows,
-Front and back bed blades 2 rows (2 blades on each row)
-Cutting Diameter:500x800mm
Controls have been added and are included with the sale of machine
MG 150T Wire Granulator
USED MG 150T
Barely used
In Great Shape Ready to Ship
Under 100 Hours of use
MG Compact 150T Cable Granulation and Separation Plant with an input capacity of 330-500 lbs./hour based on 40-45% Cu content. The plant is partly installed on a steel platform.
Technical specifications:
– Power Pack: Electric- 480 Volt – 3 Phase – 60 Hz – 20 HP
– Turbo: Yes: 10HP with inverter (speed regulator)
– Production: 330-500 lbs/hour input
– Filter: Exchangeable filter bag for transport air
– Dimensions: 117” x 52” x 111”
– Weight: 4,100 lbs
Electronics Processing Line
Electronics Processing Line
New, never installed
Includes the following pieces:
US Recycling Automation Systems E50 Electronic Waste Shredder
E50 can process up to 3ton/hr
Electronic Waste Recycling Solution
technology to separate composite materials.
Excellent for small household appliances, telecommunication, IT, hard disks, etc.
Excellent preparation for the final separation process
Up to 99.9% composite separation
Less than 50% fines created compared to other systems
30 – 50% less power consumption compared to a shredder
Technical availability up to 95% due to easy and fast access to wear parts
Impurity detection system integrated
Automatic rotors stop function (<15sec)
Low increase in material temperature due to constant air flow
Highest occupational safety due to completely closed system
Permanent material extraction once final corn size is reached
Fire/spark detection and suppression system can be added easily (optional)
Sparta SP02 Puncher Collection Conveyor
33 feet long
24 inch wide belt
1.5 HP motor
Cleveland Vibratory Screen
Distributed by Cleveland Vibrator Company
Model EMS-2448-RE-13-6(2)
24” Wide x 48” Long
Eriez HI-VI 7 foot Vibratory Feeder Pan Model
Model 65A
Style 46
Serial # P111170
Volts 115
Cycles 60
Grabit2 Forklift Attachment
GRABIT2 FORKLIFT ATTACHMENT
Demo Unit for Sale
(Video Below)
The most versatile, heavy-duty forklift attachment for scrap, bags, recycling, and beyond. Compatible with small orange peel grapples, clamshells, and specialized equipment.
Unit comes with:
– GFL6_2 Main Beam
– SHM135/K/0 4.5 ton Grapple with 5 tines (130 liter capacity) and hydraulic rotator
– Y07150A1 Upper suspension plate 4.5 ton
– AG045146A1 GFL link for K Rotator 4.5 ton
Anvil Orange Peel Grapple
Model H4T-100
1 yd
4 Tine Hydraulic Scrap Grapple w/rotation
Anvils H4T Four Tine Hydraulic Grapples are designed for general purpose scrap operations.
Vehicle Drainage
The Vehicle Drainage is an ideal solution to drain End-of-life-vehicles of all liquids. Specially developed and focused on smaller dismantlers, the Vehicle Drainage concept is very successful. The engineering and economic challenge was to find an optimal combination for a clean, efficient, but fast and cost-effective solution. This Drainage station fulfills all this requirements. With the Vehicle Drainage you can process up to 30 vehicles a day. The technology removes up to 98% of all fluids without spilling a drop.
Wheel Lug Lock Buster
If you find yourself in a situation where you need to remove a flat tire, you will need the correct tools to safely remove the wheel without damaging the car or the wheel studs. The Nut Buster is great for those emergency situations.
- Removes locking wheel nuts without the key
- Simple to use
- Saves time & effort
- Robust & long-lasting
- Works on most vehicle makes & models
- Allows the removal of valuable wheels without damage
This table has a hydraulic control that tilts the vehicle to its side making access to the underneath easier. Tools, Drill, funnels, cutters, or other accessories can be integrated and customized to your application.
It is easy to place a car onto the system. Secured by a hydraulic safety arm on the top, the car is ready to turn 90° in order to help a worker to stand upright and work on the bottom of the vehicle easily. This unit offers a safe and efficient dismantling of End-of-life vehicles. Once tried you will never want to work without it! This device combined with a platform and our dismantling swingarm offers you more ways to work in a highly professional and industrial way.
Williams Hammer Mill Item#201
Williams Hammermill
Used Hammer Mill
Excellent Condition
New Wear Liners and Bolts
50 LB Hammers
Currently Set-Up to process Non-Ferrous Material
4”x2” on ends and 4”x4” on bottom Cage Bar Screen
Spare Shaft with Bearings, Spider Rotor and Hammer Pins Attached
Dimensions are 44” x 30” OD; New Wear Plates takes 1” off of 3 sides so throat opening is 42” x 29”
NO MOTOR
There is a 200 HP Motor and Soft Start Panel Available for an additional charge
