3 Yard Rear Load Containers Item#169
Three Yard Rear Load containers
(15) Plastic
(3) Metal
Shop
A/C Removal
The A/C Removal product enables a simple and efficient degassing of automotive air conditioning in cards, trucks and buses.
Airbag Deployment
With its optional suction device, the Airbag Deployment now makes it possible to neutralize passenger restraint systems (airbags and seatbelt tensioners) with reduced noise levels and without particulate residue.
Handheld Hydraulic Shears
Our handheld hydraulic shears are powerful and portable tools. They will handle more precise cuts than alligator shears, and you can take the tool to the material rather than bringing the material to the shear. The handheld shear is easy to use and relatively lightweight. The high-pressure hydraulic tool can be used anywhere you need to go on the job.
This industrial recycling tool is specially designed for a wide range of testing industrial applications. The Holmatro cutter has general standard blades. Therefore this cutter is very much suitable in applications like:
Car recycling:
Catalytic converters, exhaust pipes, doors, A- and B-posts, drive shafts (hollow), engine mountings, steering columns, bumpers, bull bars and pressed steel wishbones.
Demolition:
Rod material, tube profiles, frames, construction materials, wood, roots (trees), fuel pipes, heating pipes, small cables.
Foundry:
Removing risers and feeders from aluminum castings
CATERPILLAR GENERATOR
Caterpillar Unit with 1310 HP
Serial number 35B3018 with 174 hours
Formerly used as a back up generator for a 42 story building in New York.
Cram-A-Lot Baler Item#205
Cram-A-Lot Vertical Baler
The DX-60-8 model features an 8″ cylinder and is ideal where high density performance is desired baling boxes, aluminum cans, plastic bottles, or shrink film.
Model: DXR-60-8
Serial #: BD15951-08
Date Of Mfg: 8/10/2011
Nominal Bale Size: 60”W x 30”D x 48”H
Bale Weight Up To (OCC): 1,400 lbs
Cycle Time (Average) 58 sec
Platen Force Normal 100,500 lbs
Max 120,600 lbs
Platen Face Pressure Normal 57.8 psi
Max 69.4 psi
Motor 3 phase 208/230/460 VAC 15HP
Pump Capacity 12 gpm
Hydraulic Reservoir Capacity 33 gal
Hydraulic Cylinder Bore Dia. 8”
Stroke 54”
Rod Dia. 5”
Operating Pressure Normal 2,000 psi
Max 2,400 psi
Dimensions Overall Height Installed 12’7”
Frame Height 8’10”
Overall Width 6’2”
Overall Depth with Door Closed 3’1”
Overall Depth with Door Open 8’3”
Loading Height 57”
Feed Opening Height 20 ½”
Unit Weight 6,000 lbs
The DX-60-8 model features an 8″ cylinder and is ideal where high density performance is desired baling boxes, aluminum cans, plastic bottles, or shrink film.
Model: DXR-60-8
Serial #: BD15951-08
Date Of Mfg: 8/10/2011
Nominal Bale Size: 60”W x 30”D x 48”H
Bale Weight Up To (OCC): 1,400 lbs
Cycle Time (Average) 58 sec
Platen Force Normal 100,500 lbs
Max 120,600 lbs
Platen Face Pressure Normal 57.8 psi
Max 69.4 psi
Motor 3 phase 208/230/460 VAC 15HP
Pump Capacity 12 gpm
Hydraulic Reservoir Capacity 33 gal
Hydraulic Cylinder Bore Dia. 8”
Stroke 54”
Rod Dia. 5”
Operating Pressure Normal 2,000 psi
Max 2,400 psi
Dimensions Overall Height Installed 12’7”
Frame Height 8’10”
Overall Width 6’2”
Overall Depth with Door Closed 3’1”
Overall Depth with Door Open 8’3”
Loading Height 57”
Feed Opening Height 20 ½”
Unit Weight 6,000 lbs
Cross Belt Magnets
The new ElectroMax Overband Magnetic Separator provides customers with a smaller, lighter, and more compact system without any compromise in separation performance. This low profile, air cooled electromagnetic conveyor meets the ever-increasing demand for high-powered, light, and compact electro magnets.
Deltax Alligator Shear Item#155
Deltax Alligator Shear
Model No. DTX-680
Single Phase: 3 HP / Three Phase:
5.5 HP Speed
Single Phase: 7 1/2 – 30 cuts/min.
Three Phase: 15 – 60 cuts/min.
26 3/4″ Blade Length
2″ – 11 3/4″ Blade Opening
55 Ton Max Shear Force
60 3/8″ L x 30″ W x 47 1/2″ H
30 Gallon Oil Capacity
Blade Table Height: 31 1/4″
Shear Capacity: 30 (1 3/16″) Steel Round Bar 45kg/mm
Eddy Current Item# 115 SOLD!!!
30″ LGI Eddy Current Separator
Comes with Steel Base
Control Panel
Extra belt and rotor sheave
Concentric Rotor
Runs and works
Used to separate 2″+ copper, aluminum, stainless, and brass pieces from waste in a scrap metal shredder downstream.
Eddy Currents
High Quality and Low Maintenance Eddy Current Separator
Separates small aluminum chips from shredded and ground plastic flake materials.
60HP Electric Motor- New
Spare motor- never used
265/460V- 3 Phase- 60Hz
60HP
888 RPM
Located in MD
